China Rubber Equipment and Machinery Cardan Shaft/Universal Shaft pto shaft bent

Merchandise Description

SWC Sequence-Medium-Duty Designs Cardan shaft

Designs

Data and Sizes of SWC Series Universal Joint Couplings

Kind Layout
Data
Merchandise		 SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 one thousand 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV one hundred one hundred 120 140 one hundred forty one hundred forty 140 a hundred and forty one hundred fifty 170 one hundred ninety a hundred ninety 240 250
M(kg) sixty five 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 one hundred 1571 1130 1340 1400 1520
M(kg) forty four sixty 85 one hundred ten 160 a hundred and eighty 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 forty eight 66 ninety a hundred thirty 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) forty eight 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 one hundred 120 a hundred and forty 140 a hundred and forty a hundred and forty 140 one hundred fifty 170 one hundred ninety one hundred ninety 240 250
M(kg) 70 92 126 a hundred sixty five 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m) 16 22.four 31.five 40 sixty three 80 90 a hundred twenty five 180 250 355 500 710 a thousand
  TF(kN·m) eight eleven.two sixteen 20 31.five forty 45 sixty three ninety a hundred twenty five 180 250 355 five hundred
  Β(°) fifteen 15 fifteen fifteen 15 15 fifteen 15 fifteen 15 fifteen 15 fifteen 15
  D a hundred and sixty 180 two hundred 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 a hundred and fifty five a hundred and seventy 196 218 233 245 280 310 345 390 435 492 555
  D2(H9) one hundred 105 one hundred twenty 135 one hundred fifty 160 one hundred seventy 185 210 235 255 275 320 380
  D3 108 114 140 159 168 one hundred eighty 194 219 245 273 299 325 402 426
  Lm ninety five 105 one hundred ten a hundred twenty five one hundred forty one hundred fifty 160 180 195 215 260 270 305 340
  K 16 17 eighteen 20 25 twenty five 27 32 35 forty forty two forty seven 50 55
  T 4 five 5 5 6 6 seven eight eight 8 ten twelve twelve 12
  N 8 8 eight eight eight eight 8 ten 10 ten sixteen 16 16 16
  D fifteen seventeen seventeen seventeen 19 19 21 23 23 twenty five 28 31 31 38
  B 20 24 32 32 forty forty forty 40 50 70 eighty 90 a hundred 100
  G six. 7. 9. 9. 12.five 12.5 twelve.five fifteen. 16. eighteen. 20. 22.five 22.5 twenty five
  MI(Kg) two.57 3 3.85 3.eighty five 5.17 six 6.seventy five eight.twenty five ten.6 13 eighteen.fifty 23.seventy five 29.twelve 38.08
  Dimension M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

1. Notations: 
L=Standard length, or compressed length for designs with length compensation 
LV=Length compensation 
M=Weight 
Tn=Nominal torque(Yield torque 50% over Tn) 
TF=Fatigue torque, I. E. Permissible torque as determined according to the fatigue strength
Under reversing loads 
β=Maximum deflection angle 
MI=weight per 100mm tube
two. Millimeters are used as measurement units except where noted 
three. Please consult us for customizations regarding length, length compensation and
Flange connections. 
(DIN or SAT etc. )

Material: Alloy Steel
Load: Cardan Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Customization:
Available

|

Customized Request

###

Type Design
Data
Item		 SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1010 1130 1340 1400 1520
M(kg) 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m) 16 22.4 31.5 40 63 80 90 125 180 250 355 500 710 1000
  TF(kN·m) 8 11.2 16 20 31.5 40 45 63 90 125 180 250 355 500
  Β(°) 15 15 15 15 15 15 15 15 15 15 15 15 15 15
  D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
  D2(H9) 100 105 120 135 150 160 170 185 210 235 255 275 320 380
  D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
  Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
  K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
  T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
  N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
  D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
  B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
  G 6.0 7.0 9.0 9.0 12.5 12.5 12.5 15.0 16.0 18.0 20.0 22.5 22.5 25
  MI(Kg) 2.57 3 3.85 3.85 5.17 6 6.75 8.25 10.6 13 18.50 23.75 29.12 38.08
  Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170
Material: Alloy Steel
Load: Cardan Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Customization:
Available

|

Customized Request

###

Type Design
Data
Item		 SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1010 1130 1340 1400 1520
M(kg) 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m) 16 22.4 31.5 40 63 80 90 125 180 250 355 500 710 1000
  TF(kN·m) 8 11.2 16 20 31.5 40 45 63 90 125 180 250 355 500
  Β(°) 15 15 15 15 15 15 15 15 15 15 15 15 15 15
  D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
  D2(H9) 100 105 120 135 150 160 170 185 210 235 255 275 320 380
  D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
  Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
  K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
  T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
  N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
  D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
  B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
  G 6.0 7.0 9.0 9.0 12.5 12.5 12.5 15.0 16.0 18.0 20.0 22.5 22.5 25
  MI(Kg) 2.57 3 3.85 3.85 5.17 6 6.75 8.25 10.6 13 18.50 23.75 29.12 38.08
  Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft CollarA 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor's engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain's reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer's instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer's instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer's specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China Rubber Equipment and Machinery Cardan Shaft/Universal Shaft pto shaft bentChina Rubber Equipment and Machinery Cardan Shaft/Universal Shaft pto shaft bent
editor by czh 2023-01-27